All Types of Fittings lined by Injection Molding (melt)/Transfer Molding Process by using virgin FEP as per ASTM 2116, PFA (FDA Approved) as per ASTM 3307. / HDPE-ASTM D 3350/PP-ASTM D 4101/PVDF-ASTM D 3222/Antistatic
All types of valve lining.
TESTING STANDARDS & PROCEDURES
All Products are tested accordingly to ASTM F 1545-15a.
Visual check for lined items Air Voids, Lining Surface, Impurities.
100 % Hydro Test for lined items at 29.8 kg/ Cm2 (150#).
100% Electrostatic Test for lined items at 10 KV.
100% thickness Test for lined items minimum 3.05 mm till 80 NB and for sizes 3.18 mm.
Valves are tested accordingly API 598.
Qualification Test for Process Approval
High-Temperature Test
Low-Temperature Test.
Steam-Cold Water Cycling Test.
Vacuum Test.
Additional Test can be performed on customer’s request.
