Engineering Fluoropolymer Coating
DTech Products engineers and manufactures advanced fluoropolymer coatings and linings in PFA, FEP, PVDF, ECTFE and ETFE for critical process equipment, including pipes, fittings, valves and vessels. Designed for demanding chemical environments, our solutions deliver exceptional chemical resistance, long-term equipment protection, process reliability and high levels of product purity.
Chemical Resistance
Continuous Service Up to 260°C (PFA)
ISO 9001:2015
ISO 45001:2018
ISO 14001: 2015
Highly Graded Fluoropolymer
Your Conventional Equipment Will Eventually Fail
Corrosive chemicals don’t just damage equipment — they quietly erode reliability, safety, and cost control.
Corrosion
Chemical attack steadily weakens unprotected metal surfaces.
Equipment Failure
Standard materials wear out far sooner than expected.
Unexpected Downtime
Unplanned failures halt production without warning.
High Lifecycle Cost
Repeated replacement outweighs correct specification.
WHY FLUOROPOLYMER
Why Fluoropolymer Is the Right Engineering Choice?
Chemical Resistance
Resists aggressive acids, alkalis and solvents.
High Temperature Performance
Maintains performance under demanding operating conditions.
Non-Stick Surface
Reduces fouling and product buildup.
High Purity
Suitable for contamination-sensitive processes.
Long Equipment Life
Extends service intervals significantly.
Low Maintenance
Fewer interventions, less unplanned downtime.
Need help selecting the right fluoropolymer solution?
Trusted Across Corrosive Process Industries
Fine Chemical Manufacturer
Petrochemical
Power Stations
Surfactant Chemical Industry
Process Plant Manufacturers
Fertilizer Industry
Flow Meter Manufacturers
Pharmaceuticals
Bromine Industries
Water treatment
Biodiesel Production
Chemical Manufactures
Cleaning & Detergent Products
Paint Manufactures
Paper & Pulp Industry
Fluoropolymer Materials
Select the right fluoropolymer based on chemical resistance, operating temperature, mechanical performance and application requirements.
PFA Perfluoroalkoxy ›
PFA is selected for demanding applications requiring exceptional chemical resistance and continuous operation at elevated temperatures. Its near-universal chemical inertness and high purity make it particularly suitable for critical corrosive and high-purity processes.
FEP Fluorinated Ethylene Propylene ›
FEP provides excellent chemical resistance for general corrosive-service applications, with reliable performance at temperatures up to approximately 200°C. Its low-friction surface and electrical insulation properties also make it suitable for fluid handling, cable and electrical applications.
PVDF Polyvinylidene Fluoride ›
PVDF offers a practical balance of chemical resistance, mechanical strength and cost for moderate-temperature applications. It is particularly suited to processes involving strong acids and selected halogenated solvents.
ECTFE Ethylene Chlorotrifluoroethylene (Halar®) ›
ECTFE combines strong chemical resistance with excellent resistance to gas and chemical permeation. Its high tensile and impact strength makes it a strong choice where both barrier performance and mechanical durability are important.
ETFE Ethylene Tetrafluoroethylene ›
ETFE provides good chemical resistance together with high tensile and impact strength. Its combination of durability and structural performance makes it particularly suitable for demanding protective and structural coating applications.
Technical Comparison
Select the right material based on your process requirements, operating temperature and performance priorities.
| Material | Max. Temperature | Chemical Resistance | Permeation Resistance | Mechanical Strength | High-Purity Suitability | Surface Properties | Typical Positioning |
|---|---|---|---|---|---|---|---|
| PFA | Up to 260°C | Excellent | Excellent | Lower | Excellent | Non-stick / Low friction | Premium |
| FEP | Up to 200°C | Excellent | Excellent | Lower | Excellent | Non-stick / Low friction | Mid-range |
| PVDF | 140–155°C | Very Good | Very Good | Moderate | Good | Low friction | Mid-range |
| ECTFE | 140–155°C | Very Good | Excellent | High | Good | Low friction | Mid-range |
| ETFE | 140–155°C | Good | Good | High | Moderate | Low friction | Premium |
GLOBAL MATERIAL STANDARDS
Genuine Fluoropolymer Materials from Global Manufacturers
DTech selects genuine fluoropolymer resins from established global manufacturers to maintain consistent material properties, chemical performance and reliability across demanding coating applications.
TEFLON™
Chemours
Fluoropolymer materials known for exceptional chemical resistance, non-stick performance and high-purity service.
KYNAR®
Arkema
PVDF-based fluoropolymer materials offering a strong balance of chemical resistance, mechanical performance and processability.
HALAR®
Solvay
ECTFE fluoropolymer technology combining strong chemical resistance, permeation resistance and mechanical durability.
POLYFLON™
Daikin
Fluoropolymer materials developed for demanding chemical environments requiring reliable corrosion-resistant performance.
INOFLON®
GFL
Fluoropolymer materials designed for demanding industrial applications where chemical resistance and consistent performance are critical.
FLUON®
AGC
Fluoropolymer materials used where chemical resistance, purity and dependable surface performance are required.
Why Partner with DTech ?
Engineering-Driven Solutions
Material selection based on process conditions, not preference.
Global Grades Under One Roof
PFA, FEP, PVDF, ECTFE, and ETFE from a single manufacturer.
Custom Coating & Lining Solutions
Specification matched to your equipment and process.
Quality-Focused Manufacturing
ISO 9001:2015 certified processes and controls.
Application-Based Material Selection
The right polymer for your temperature and chemistry.
Technical Support
Direct engineering input before and after specification.
READY TO FIND THE RIGHT FLUOROPOLYMER?
Need the Right Fluoropolymer Solution?
Talk to DTech’s engineering team about your operating conditions — chemicals, temperatures, and application requirements — and get a fluoropolymer specification matched to your process.